Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Volkswagen Transporter T6

Model: Volkswagen Transporter T6, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

The presenter in this video shows how easy it is to reset the service light in a Volkswagen Transporter T6. For this procedure, all you need is the vehicle key and a single button on the dashboard. If you look in the bottom left corner of the dashboard, you will see a button labelled '0.0/SET' which is used to reset the service light.

Hold it down while turning the key to switch on the ignition, then wait a few seconds before releasing it. This way, you have completed the reset procedure!


Posted on 8 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Transporter T6?
How to Reset the "Service" Light on a Volkswagen Transporter T6?
Volkswagen Transporter (2014-2025 / T6, MK 6) Good morning, today’s objective is to reset the "Service" light on your Volkswagen Transporter T6. Start by sitting in the driver’s seat. Then, by pr…
How to Reset the Service Light on the Volkswagen Transporter?
How to Reset the Service Light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) You can completely remove the Service light from the instrument cluster of the Volkswagen Transporter by holding down the 0.0 button located on the r…
How do you reset the service light on the Volkswagen Transporter T6 1?
How do you reset the service light on the Volkswagen Transporter T6 1?
Volkswagen Transporter (2014-2025 / T6, MK 6) The reset of the service light on the Volkswagen Transporter T6 1, vehicle presented in the video, is done personally and without any electronic diag…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos