Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on the Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Service warning light

See other generations:
Video tutorial

In this article, we will show the procedure to reset the oil light, or service light, on the Volkswagen Golf 5. Remember to perform this procedure only after completing the service. To reset the light, insert the key into the ignition lock, then press the 0.0 button located on the right side of the panel, keeping it pressed while starting the ignition.

Once the panel is illuminated, release the button and press the MIN button located on the left side of the panel. Now the reset procedure will be complete.

It is advisable to restart the panel to verify that the procedure was successful.


Posted on 15 September 2026 by ScegliAuto


Related tutorials

Maintenance light reset on a Volkswagen Golf 4.
Maintenance light reset on a Volkswagen Golf 4.
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Let's see thanks to this very useful tutorial how to reset the maintenance light of the engine oil on a Volkswagen Golf 4. Let's start by pressing an…
Reset the Engine Oil Service Light on the Volkswagen Golf
Reset the Engine Oil Service Light on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial, you will learn how to reset the engine oil service light on the Volkswagen Golf by following these simple steps. First, get in the …
How to Reset the Service Light on the Volkswagen Golf
How to Reset the Service Light on the Volkswagen Golf
Volkswagen Golf (2019-2026 / MK 8, Golf 8, Golf Viii) This guide provides instructions to reset the service light for the routine maintenance of the engine oil change on the Volkswagen Golf. First, get i…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos