Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a Roof Monitor

Model: Volkswagen Touareg 7L, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Accessory kit

See other generations:
Video tutorial

First, use the drilling template included in the kit, ensuring it is correctly positioned on the headlining and secured with masking tape to outline the area of trim to be removed: following the indicated measurements, the cut will align with the reinforcement rib of the roof, which is already drilled for the insertion of rivets to secure the monitor support plate.

Next, completely remove the interior light, the trim of the left windscreen pillar, and take off the protective covers of the fuse box and the fuse box itself (this will be needed for electrical connections).

Connect a probe to the monitor wiring and pass the cables through the hole just made, to the interior light and through the headlining and pillar to reach the fuse box. Then, secure the monitor support plate to the roof with the rivets, connect the plug to the monitor, and fasten it to the plate with the appropriate screws.

Finally, make the electrical connections (permanent positive, switched positive, and ground), ensuring they are properly insulated, and reassemble everything in reverse order.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Roof Lining of the Volkswagen Touareg
How to Remove the Interior Roof Lining of the Volkswagen Touareg
Volkswagen Touareg (2002-2010 / 7L, MK 1) Today's guide will show you how to remove and replace the headlining of the Volkswagen Touareg in simple steps. First, get inside the cabin and start…
Instructions for Installing the Manufacturer's Emblem
Instructions for Installing the Manufacturer's Emblem
Volkswagen Touareg (2002-2010 / 7L, MK 1) If you need to replace the manufacturer's emblem attached to the front grille, it is recommended to use a plastic lever or a small screwdriver with i…
Installing the Aux Input Adapter for the Car Radio
Installing the Aux Input Adapter for the Car Radio
Volkswagen Touareg (2002-2010 / 7L, MK 1) To install the Aux input adapter, you first need to remove the car radio: use the appropriate extraction keys to insert into the respective slots wit…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos