Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Installing the Manufacturer's Emblem

Model: Volkswagen Touareg MK 1, 7L - Years 2002-2010
Part: Manufacturer emblem

If you need to replace the manufacturer's emblem attached to the front grille, it is recommended to use a plastic lever or a small screwdriver with insulating tape on the tip. The emblem is secured with three plastic clips (two at the top and one at the bottom): simply lever along the edge to disengage and remove it. To install the new one, align the clips with the corresponding slots on the grille and press them slightly to allow them to fit into place.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Grille
Instructions for Removing the Front Grille
Volkswagen Touareg (2002-2010 / MK 1, 7L) The front grille is secured to the front panel with a screw located just below the manufacturer's badge and with snap tabs along the upper edge; star…
Instructions for Removing the Instrument Cluster on Volkswagen Touareg 1
Instructions for Removing the Instrument Cluster on Volkswagen Touareg 1
Volkswagen Touareg (2002-2010 / MK 1, 7L) In today's video, you will see the instructions for removing the instrument cluster on a first-generation Volkswagen Touareg. First, get inside the c…
Installing the Aux Input Adapter for the Car Radio
Installing the Aux Input Adapter for the Car Radio
Volkswagen Touareg (2002-2010 / MK 1, 7L) To install the Aux input adapter, you first need to remove the car radio: use the appropriate extraction keys to insert into the respective slots wit…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos