Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Aux Input Adapter for the Car Radio

Model: Volkswagen Touareg 7L, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Accessory kit

See other generations:
Video tutorial

To install the Aux input adapter, you first need to remove the car radio: use the appropriate extraction keys to insert into the respective slots with the notches facing inwards; once the retaining springs are released, pull the radio out (lever the tabs to extract the keys).

Then, disconnect the rear connector and perform a bypass with the wiring provided with the adapter, also securing the ground loop to the car radio casing.

Before reinstalling everything, configure the adapter and check its functionality. At this point, remove the glove compartment to better position the wiring and place the Aux input inside the glove compartment.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Volkswagen Touareg?
How to Replace the Radio in a Volkswagen Touareg?
Volkswagen Touareg (2002-2010 / 7L, MK 1) Replacing the radio in a Volkswagen Touareg is an extremely simple and quick task. You will need four special keys shown in the video, which are easi…
How to Restart the Radio in a Volkswagen Touareg?
How to Restart the Radio in a Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) If the radio in your Volkswagen Touareg shows signs of malfunction or if you have activated unwanted functions, you can perform a simple reset by fol…
How to Reset the Oil Warning Light on the Volkswagen Touareg
How to Reset the Oil Warning Light on the Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) Below, we will explain in detail the steps required to independently reset the engine oil warning light on your Volkswagen Touareg Mk1. Furthermore, …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos