Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Grille on a Volkswagen Golf Mk6

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Trim cover

How do you remove the front grille on a Volkswagen Golf Mk6? Remove the plastic grille frame from both sides of the bumper; using a suitable plastic lever, pry between the frame and the bumper until the clips inside release (unclip the bumper at the top for easier access). Once the clips are released, remove the grille from the bumper and fit a new one (unscrew any screws if present). Refit the grille into the bumper by pressing it until it locks in place. Check the correct fitting of the parts.

Updated on 12 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to remove the front bumper on Volkswagen Golf MK7
How to remove the front bumper on Volkswagen Golf MK7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In today's video, you will learn how to remove the front bumper on a seventh-generation Volkswagen Golf, following the instructions below. First, ope…
How to Remove the Front Bumper of a Volkswagen Golf Mk5
How to Remove the Front Bumper of a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) How to remove the front bumper of a Volkswagen Golf Mk5? Let’s see the disassembly. Lift the engine bonnet and secure it; using a socket wrench (batt…
How do you remove the front headlight in the Volkswagen Golf 4?
How do you remove the front headlight in the Volkswagen Golf 4?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video, we will show you how to disassemble the front headlight of the Volkswagen Golf 4. We open the hood, unscrew the two screws of the uppe…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos