Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Clock on a Volkswagen Touran?

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Clock

See other generations:
Video tutorial

You can adjust the clock on the Volkswagen Touran by first activating the instrument panel by turning the appropriate key in the ignition. Once the panel is activated, press the button located on the left side of the display.

Turning the button clockwise will modify the minutes, while turning it counter-clockwise will change the hours. Once the correct time is set, release the button completely and switch off the display by removing the key.


Posted on 21 November 2026 by ScegliAuto


Related tutorials

Volkswagen Touran (2015-2024 / 5T, MK 2) On the Volkswagen Touran, you can adjust the clock by inserting the key to turn on the instrument cluster and pressing the button located at the bott…
Volkswagen Touran (2015-2024 / 5T, MK 2) To set the clock on a Volkswagen Touran, turn the key to switch on the instrument panel and press the button located at the bottom left of the panel.…
Volkswagen Touran (2003-2015 / 1T, MK 1) To set the clock on a Volkswagen Touran, first turn on the instrument panel by turning the ignition key. Once the panel is on, use the button located…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos