Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Clock on a Volkswagen Touran?

Model: Volkswagen Touran 5T, MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Clock

See other generations:
Video tutorial

On the Volkswagen Touran, you can adjust the clock by inserting the key to turn on the instrument cluster and pressing the button located at the bottom left of the panel. This will cause the hour display to start flashing, which can be modified by pressing SET located at the bottom right of the instrument cluster.

Once the hours are correct, press the button again at the bottom left to confirm and repeat the same process to adjust the minutes. When the correct time has been set, you can turn off the ignition to finish.


Posted on 6 October 2026 by ScegliAuto


Related tutorials

Volkswagen Touran (2015-2024 / 5T, MK 2) To set the clock on a Volkswagen Touran, turn the key to switch on the instrument panel and press the button located at the bottom left of the panel.…
Volkswagen Touran (2003-2015 / 1T, MK 1) To set the clock on a Volkswagen Touran, first turn on the instrument panel by turning the ignition key. Once the panel is on, use the button located…
Volkswagen Touran (2003-2015 / 1T, MK 1) The clock adjustment on the instrument panel of the Volkswagen Touran can be done by inserting the ignition key into the corresponding slot: once the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos