Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Gear Gaiter on VW Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Shifter boot

See other generations:
Video tutorial

Is your gear gaiter torn? To replace it, you need to remove the knob. Here's how. Use a plastic lever to disconnect the leather gaiter frame, then remove the metal clip with pliers.

Take the gear knob in your hands and rotate it left and right until it comes off the stick. For reassembly, take the new knob and slide it onto the stick in the centre console, secure the metal clip with pliers, and slide the leather gaiter down the stick.

Attach the plastic frame to the centre console. Check the correct fitting of the gaiter and knob.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Shift Gaiter on a Volkswagen Golf
How to Remove the Gear Shift Gaiter on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To remove the gear shift gaiter on a Volkswagen Golf, sit inside the car and look towards the centre console where the gear lever is located. Careful…
How to Remove the Gear Shift Gaiter on a Volkswagen Golf
How to Remove the Gear Shift Gaiter on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Before you can begin, sit in the driver's seat of your Volkswagen Golf. Start by unclipping the base of the gear shift gaiter using a flat screwdrive…
How to Replace the Gear Knob and Gaiter on a Volkswagen Golf
How to Replace the Gear Knob and Gaiter on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Before starting, sit in the driver's seat of your Volkswagen Golf. Begin by unhooking the lower base of the gear lever gaiter, then lift it to reveal…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos