Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Headlight Bulb in a Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Headlight bulb

To replace the dipped headlight bulb in a Golf 7, first, place the car on a ramp or flat surface to work safely. Now, open the front bonnet of the engine compartment. Next, remove the plastic cap that protects the electrical contacts from water and humidity by unscrewing it. Then, you can remove the bulb to be replaced by simply turning the tab of the housing block clockwise. After that, remove the old bulb and fit the new one. Reposition the entire housing block of the bulb back into its place and screw the protective plastic cap back on.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Dipped Beam Bulb on Volkswagen Golf 7
Replacing the Dipped Beam Bulb on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Replacing the dipped beam bulb on a Volkswagen Golf 7 is really straightforward, and we will show you how. Lift the bonnet securely. Access the rear …
How to replace the dipped headlight bulb of the Volkswagen Golf
How to replace the dipped headlight bulb of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this guide we will see step by step instructions on how to disassemble and replace the low beam bulb of the front headlight of the Volkswagen Golf…
Replacing the Dipped Beam Bulb in the Front Headlamp of a Volkswagen Golf
Replacing the Dipped Beam Bulb in the Front Headlamp of a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In a few simple steps, see how to replace the dipped beam bulb in the front headlamp of a Volkswagen Golf. First, open the bonnet of the vehicle and …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos