Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the Vw Polo diesel filter

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Diesel filter
Operation: How to remove the Vw Polo diesel filter

Replacing the damaged diesel filter of a Vw Polo, let's see how it is disassembled. We lift the front hood of the engine, we locate the diesel filter. With a pliers wrench we disconnect the circulation pipes, then we release the plastic around the container where the diesel filter is located. Remove the diesel filter container from the car (replace it with a new one). We mount the diesel filter (we connect pipes and cables) and we tighten the same in the blocking plastics. Let's turn on the Polo and see if everything works. We close the front hood at the end of assembly.


Posted on 3 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - Where is the diesel filter located on Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos