Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Filter on the Volkswagen Polo 1.6 TDI

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Checks and maintenance

Below are the instructions that will allow you to remove and replace the fuel filter on the Volkswagen Polo 1.6 TDI. First, open the bonnet and locate the fuel filter, which is found behind the coolant reservoir; then disconnect the filter pipes and subsequently the electrical connector to remove it from the bracket, as shown in the video. At this point, install the new fuel filter, making all the connections and securing it properly, following the video tutorial to the end!

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this video tutorial, you will learn how to remove and replace the diesel filter on a Volkswagen Polo 1.6 TDI; the procedure is similar for other v…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In the video tutorial available to us, there is a very well-made step-by-step explanation of how to replace the diesel filter of the Volkswagen Polo …
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In today's tutorial, you will learn how to remove and replace the fuel filter on a Volkswagen Polo 1.6 TDI in simple steps. First, open the engine bo…

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos