Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Where is the fuel filter located in the Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Petrol filter
Operation: Where is the fuel filter located in the Volkswagen Polo?

In this video, we can see where the fuel filter is located in the Volkswagen Polo and how to proceed in case we need to replace it, which is a very simple operation. As shown, the filter is positioned in the lower area of the vehicle, specifically in front of the right rear wheel. To remove it, we start by lifting the same side with a jack and taking all the necessary safety measures, then we disconnect both fuel pipes by unlocking the respective clips. Next, we remove the screw of the fixing bracket and follow the reverse procedure to install the replacement.


Posted on 12 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the petrol filter on Volkswagen Polo? Read Answer
    • Polo 2009-2017 - What is the price of the petrol filter for the Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Where is the VW Polo 9n petrol filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos