Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Replace the cartridge filter on the Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Petrol filter
Operation: Replace the cartridge filter on the Vw Polo

Replace the fuel filter on Volkswagen Polo? Let's see how it disassembles from under the car. We lift the car onto a column bridge, locate the fuel filter under the car bed. With a socket wrench we unscrew the tightening screw located near the container (disconnect the cables and the various tubes from the filter) where the fuel filter is located. Once the filter has been disassembled, remove it from under the floor. We mount the filter in the filter holder (we connect pipes and cables) and tighten the appropriate screws. We bring the car to the ground and turn on the vehicle to test the operation.


Posted on 13 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the petrol filter on Volkswagen Polo? Read Answer
    • Polo 2009-2017 - What is the price of the petrol filter for the Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Where is the VW Polo 9n petrol filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos