Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the fuel filter of the Volkswagen Polo 5

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel filter

See other generations:
Video tutorial

To replace the fuel filter of the Volkswagen Polo, we put the car on a lift and raise it to a height that allows us to work underneath the chassis. We find the filter at the height of the driver's seat, clean the connections with a spray, place a basin underneath to collect any fuel leaks, disconnect the incoming tubes using a lever and a screwdriver, unscrew the fixing clamp screw, remove the filter and remove the outlet tube.

Insert the new filter into the clamp, insert the outlet tube, secure the filter and insert the two incoming tubes.


Posted on 27 December 2024 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on a VW Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Replacing the fuel filter on a Volkswagen Polo? Here’s how to remove it from under the car. Lift the car on a column lift, locate the fuel filter und…
Where is the fuel filter located in the Volkswagen Polo?
Where is the fuel filter located in the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This video shows where the fuel filter is located in the Volkswagen Polo and how to proceed if you need to replace it, a very simple operation. As sh…
Guide to Removing the Fuel Pump from the Volkswagen Polo
Guide to Removing the Fuel Pump from the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today's guide will show you how to remove and replace the fuel pump in the Volkswagen Polo by following these simple steps. First, open the rear door…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos