Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Removing the door panel on the Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK III, Polo 3, MK 3, 6N, Polo III - Years 1994-2003
Part: Door panel
Operation: Removing the door panel on the Vw Polo

Do we want to remove the damaged door panel of the Polo? Let's see how it's done. With a screwdriver we unscrew the screws placed in the space of the upper lever of the door opening. We unscrew the screws present in the handle after removing the plastic cover. We remove the plastic covering near the window, unscrew the screws left on the door panel and remove the clips fastening it. We remove the window lifter crank. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We mount the new panel above the door.


Posted on 3 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 1994-2003 - How do you remove the Volkswagen Polo door panel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos