Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fog Light on a VW Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Fog lights

See other generations:
Video tutorial

Is the fog light mounted in the bumper of your VW Passat damaged? Here's how to remove it. Remove the plastic grille around the side fog light on the bumper (unscrew the screw). After removing the grille, unscrew the retaining screws of the light using the appropriate screwdriver, then remove the light from the bumper.

Once the light is extracted, replace it with a new one, and replace the bulb if damaged (same size and voltage). Refit the light into the bumper of the car with the plastic grille.

Test the correct operation of the new light.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Replacing the Front Fog Light Bulbs on the Volkswagen Passat
Replacing the Front Fog Light Bulbs on the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Today, you will see the instructions that will allow you to disassemble and replace the front fog light bulbs on the Volkswagen Passat. First, move t…
How to Replace the Fog Lights on a Volkswagen Passat
How to Replace the Fog Lights on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) The video illustrates the steps to replace the fog lights on a Volkswagen Passat B7. First, ensure the vehicle is turned off. Now, remove all the chr…
How to Replace the Fog Light Bulb in a Volkswagen Passat?
How to Replace the Fog Light Bulb in a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To replace the fog light bulb in a Volkswagen Passat, loosen the screws securing the grille around the light, located at the lower side of the bumper…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos