Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light Bulbs on the Volkswagen Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Fog lights

Today, you will see the instructions that will allow you to disassemble and replace the front fog light bulbs on the Volkswagen Passat. First, move to the front of the vehicle and start by removing the plastic fog light grille, prying it from the sides; then unscrew the screws of the light unit, disconnecting the electrical connector to remove it, as shown in the video. At this point, replace and install the new front fog light bulb, securing it properly in the holder; check the light operation and refit the fog light assembly!

Posted on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Lights on a Volkswagen Passat
How to Replace the Fog Lights on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) The video illustrates the steps to replace the fog lights on a Volkswagen Passat B7. First, ensure the vehicle is turned off. Now, remove all the chr…
Replacing the Front Fog Light Bulb on a Volkswagen Passat
Replacing the Front Fog Light Bulb on a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Today, we will see in this brief and simple guide how to remove and replace the front fog light bulb on a Volkswagen Passat. First, move to the front…
Replacement of the rear headlight bulbs of the Volkswagen Passat
Replacement of the rear headlight bulbs of the Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) In this short and simple guide, we will see the instructions on how to disassemble and replace the bulbs of the rear headlight of the Volkswagen Pass…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos