Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Shock Absorbers on Volkswagen Golf 6

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Shocks

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the rear shock absorbers on a Volkswagen Golf 6. First, remove the rear wheel and lift the car. Then, using a hydraulic jack, support the driveshaft and unscrew its bolt to separate it from the wheel hub. Next, remove the spring and unscrew the shock absorber bolt.

Now, unscrew the upper bolts of the shock absorber to extract it. Before fitting the new ones, clean the area thoroughly.

Remember to use original parts to ensure the driver's safety.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Replacing the Boot Gas Struts in a Volkswagen Golf Mk4
Replacing the Boot Gas Struts in a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, you will learn how to replace the gas struts of the boot lid in a Volkswagen Golf Mk4. First, open the boot lid and use a screwdriver …
How to Replace the Rear Shock Absorbers on a Volkswagen Golf?
How to Replace the Rear Shock Absorbers on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this tutorial, see how to replace the rear shock absorbers on a Volkswagen Golf, a straightforward task if you have good manual skills. First, lif…
Checking the Rear Shock Absorber Knock
Checking the Rear Shock Absorber Knock
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If you hear a knock coming from the rear wheels while driving over rough terrain, it is likely due to the failure of the rear shock absorber mounts; …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos