Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking the Rear Shock Absorber Knock

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Shocks

See other generations:
Video tutorial

If you hear a knock coming from the rear wheels while driving over rough terrain, it is likely due to the failure of the rear shock absorber mounts; therefore, lift the vehicle and remove the rear wheels: you will likely notice a failure of the rubber damper that should be attached to the upper support plate of the shock absorber; clearly, in the case of a dip, the shock absorber reaches the end of its travel, and without the rubber damper, you hear the knock; you will need to proceed with the replacement.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Shock Absorbers
Replacing the Rear Shock Absorbers
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Shock absorbers should be replaced when they no longer perform their function, regardless of the mileage. To replace them, lift the vehicle and secur…
Replacing Rear Shock Absorbers on Volkswagen Golf 6
Replacing Rear Shock Absorbers on Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this video tutorial, you will see how to replace the rear shock absorbers on a Volkswagen Golf 6. First, remove the rear wheel and lift the car. T…
Replacing Rear Shock Absorbers
Replacing Rear Shock Absorbers
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the rear shock absorbers, lift the vehicle, remove the rear wheel, apply a support jack under the suspension, and proceed to remove the up…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos