Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Centre Console and Navigation System from a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Onboard computer

Learn how to remove the navigation system from a seventh generation Volkswagen Golf. First, get inside the car and use a lever to detach the plastic trim next to the navigation system and onboard computer. Once removed, pry at the top to disconnect the electrical connector located at the back; finally, remove the display by also disconnecting the electrical connectors on the rear. To reassemble, apply the reverse procedure for the navigation system!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset/Reboot Navigation System on Volkswagen Golf 7
Reset/Reboot Navigation System on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This video shows the instructions to reset or reboot the navigation system on the Volkswagen Golf Mk7. First, get inside the vehicle and turn on the …
How to Reset the Navigation System of the Volkswagen Golf 7.5
How to Reset the Navigation System of the Volkswagen Golf 7.5
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this short video, you will see how to reset the main navigation system of the seventh generation Volkswagen Golf by following these simple and qui…
Remove Gear Knob on VW Golf 4
Remove Gear Knob on VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Is the gear knob on your Volkswagen Golf 4 damaged? Here’s how to change it from above the centre tunnel. Pry off the leather gaiter frame with a lev…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2019-2026 - Why does the Volkswagen Golf 8 front assist system not work? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos