Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

Lift the bonnet and insert the support rod. Disconnect the battery terminals and remove the plastic bracket above it. Unscrew and remove the plastic cover located behind the headlamp on the battery side. This is secured to the base by two bolts that need to be unscrewed, as shown in the video.

Remove the battery and unscrew the bolts located underneath it, which are now accessible, using a 10 mm socket. Remove the cover secured by these bolts, and at this point, you can access the two bolts that secure the control unit for the fan and the attached relay.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) In this guide, you will see the procedure to remove and replace the windscreen wiper relay on the Volkswagen Golf. First, get in the vehicle and star…
Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) The starter relay for the Volkswagen Golf Mk5 is located inside the fuse box under the bonnet, specifically near the battery. To view and replace the…
Volkswagen Golf (1983-1992 / Golf 2, MK 2) To replace the radiator on the Volkswagen Golf 2, first open the bonnet and then unscrew the cap of the coolant reservoir. Next, disconnect the coola…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Adjust the Rear Seats of the BMW X1

In this video, see how the BMW X1's cargo area can be used to transport large loads. To expand this area, the rear seat can be folded down with a 40/20/40 split, each section can be folded separately or all together. The seats can be adjusted independently to provide more space for passengers or cargo: to do this, pull the handle located at the bottom and push or pull as needed. To position the backrest in the desired position, there is a cordura handle on the left side. Inside the trunk, there are buttons that automatically fold the backrests of the rear seats forward, but only after ensuring they are clear. They can be returned to an upright position manually using the cordura handle.

Watch the video!


by ScegliAuto

More videos