Do it yourself
Frequently asked questions about cars and motorcycles

Fuses on Volkswagen Polo 1.6I

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Fuse box

Let’s see how to replace the damaged fuses in a Volkswagen Polo 1.6. Use a plastic lever to remove the trim located in the dashboard on the driver’s side, then use needle-nose pliers to pull out the damaged fuses in the compartment. Once this is done, insert the new fuses into the designated slots in the compartment. Finally, test the correct operation of the vehicle by turning on the ignition with the appropriate key. Check the various accessories and electrical systems. Close the fuse inspection box with the trim cover after testing.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) The fuses shown in the video are the ones for the Volkswagen Polo 9n, and now we will specify where they are located. They are all installed in the f…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) All the fuses in the Volkswagen Polo are located within specific fuse boxes installed in the vehicle. In this model, you can find two boxes for the f…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Identifying the fuses of your Volkswagen Polo 9N is really simple. To successfully complete the search, all you have to do is follow all the steps de…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - What is the location of the power steering fuse on the Volkswagen Polo? Read answer
    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos