Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Polo Radio Replacement

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

Remove the cup holder and its cover located to the right of the radio, then unscrew the T20 screw inside the compartment. Use the appropriate tools to remove the radio, inserting them into the four corner slots until fully engaged, then pull them, and the radio will come out. Once extracted, disconnect the connector and antenna at the back.

If your aim is only to replace the radio, you can now proceed with reassembly in reverse order; otherwise, continue disassembling by removing the cup holder compartment by pressing the three tabs.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replacing the Radio in a Volkswagen Polo
Replacing the Radio in a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Remove the radio from the Volkswagen Polo if it is damaged or if you want to change it. Use a plastic lever to remove the radio trim (without damagin…
How to Force Reset the Radio in a Volkswagen Polo
How to Force Reset the Radio in a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today, we will discover the instructions to force reset the radio in a Volkswagen Polo in simple and quick steps. First, get inside the vehicle and t…
How to Remove the Factory Radio from a Volkswagen Polo
How to Remove the Factory Radio from a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) We will briefly discover the instructions to remove and replace the factory radio of the Volkswagen Polo in simple steps. First, get into the vehicle…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos