|
Do it yourself
| |||
| ||||
Installation of LED Courtesy Lights
Model: Volkswagen Golf
MK 6, Golf 6, Golf VI, 5K1
- Years:
2008, 2009, 2010, 2011, 2012
Video tutorial
The first operation is to remove the door panel: unscrew the screws along the edges, remove the cover of the internal handle grip, and then the screws underneath; unclip the pressure clips along the edges and remove the panel by disconnecting the cable of the opening lever and the speaker. Disconnect the grey connector with the purple safety and extract the terminal block; insert the two spade connectors of the power supply for the lamp holder to be fitted under the panel in place of the reflector, into the first two free positions of the terminal block. Refit the panel and attach the lamp holder. Repeat the operation on the rear panel, taking the power from the two central pins of the power supply connector for the window lifter motor. If the pressure clips remain inserted in the door, remove them and attach them to the panel before refitting it. The activation of the courtesy lights must then be configured with the diagnostic tool via the comfort module.
Updated on 7 February 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2012-2019 /
Golf 7, Golf VII, MK 7)
Replacing the interior lighting bulbs with LED types will make the cabin brighter and give the car a more modern and appealing look. Start with the f…
Volkswagen Golf
(2008-2012 /
MK 6, Golf 6, Golf VI, 5K1)
Replacing the bulbs of the number plate lights with LED type will give the vehicle a much more modern and appealing look, as well as significantly im…
Volkswagen Golf
(2008-2012 /
MK 6, Golf 6, Golf VI, 5K1)
The tools needed for this replacement are simple plastic spatulas to detach the various light fittings. It is important to note that LED bulbs, unlik…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |