Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Interior Lights

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Accessory kit

See other generations:
Video tutorial

Replacing the interior lighting bulbs with LED types will make the cabin brighter and give the car a more modern and appealing look. Start with the front dome light by releasing the rear plastic trim that covers the two grilles, unscrewing the screws underneath, then detach the dome light itself and replace the bulbs.

Move on to the courtesy lights under the sun visors by removing the bulb holders from the headlining. Repeat the same steps for the door panel lights, for which it is necessary to disassemble the bulb holder to replace the bulb.

Proceed similarly for the passenger side kick plate light and complete the installation with the rear dome light. Finally, finish the upgrade with the lights in the boot.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Installation of LED Number Plate Lights on VW Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Replacing the bulbs of the number plate lights with LED type will give the vehicle a much more modern and appealing look, as well as significantly im…
How to Replace the Number Plate Bulbs on a Volkswagen Golf 6
How to Replace the Number Plate Bulbs on a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the number plate lights with LED ones on the Volkswagen Golf 6, start by unclipping the light unit from the bumper of the car, disconnect …
Replacement of Interior Bulbs with LED Model
Replacement of Interior Bulbs with LED Model
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Replacing the interior bulbs with LED ones will give the cabin a more technical and modern appearance. The operation is extremely simple and does not…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos