Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Interior Light Bulbs with LED Model

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Accessory kit

The tools needed for this replacement are simple plastic spatulas to detach the various light fittings. It is important to note that LED bulbs, unlike incandescent ones, have a polarity that must be respected: if the bulb does not light up when first inserted into the socket, rotate it 180°.
Having made this clear, proceed by detaching the rear light fitting from the headlining, removing the original bulb and replacing it with the LED one; do the same for the front light fitting, the courtesy lights under the sun visors, and the scuff plate (in this case, you need to open the bulb holder to replace the bulb).
Perform this operation also for the rear number plate lights.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Interior Bulbs with LED Model
Replacement of Interior Bulbs with LED Model
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Replacing the interior bulbs with LED ones will give the cabin a more technical and modern appearance. The operation is extremely simple and does not…
Installation of LED Interior Lights
Installation of LED Interior Lights
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Replacing the interior lighting bulbs with LED types will make the cabin brighter and give the car a more modern and appealing look. Start with the f…
Dismantling and replacing the interior light bulb of the Volkswagen Golf
Dismantling and replacing the interior light bulb of the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today's guide will show you the instructions on how to dismantle and replace the interior light bulb of the Volkswagen Golf's ceiling light. First, g…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos