|
Do it yourself
| |||
| ||||
Removing Instrument Cluster from VW Golf 4
Model: Volkswagen Golf
MK 4, Golf 4, Golf IV
- Years:
1997, 1998, 1999, 2000, 2001, 2002, 2003
Video tutorial
Want to remove the instrument cluster from the Golf 4? Let's see how to take apart the instrument cluster and its associated parts. Remove the cover under the instrument cluster with a plastic lever (without breaking the plastic clips) and detach it from the dashboard. Unscrew the securing screws, disconnect the power connectors of the instrument cluster, and remove it. After removing the instrument cluster from the dashboard, prepare to install a new piece or reassemble the same one (repair the instrument cluster if necessary). Finally, proceed in reverse with the assembly of the instrument cluster and the plastic cover. Test the operation of the new or repaired part.
Updated on 8 April 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2003-2008 /
Golf 5, Golf V, MK 5)
How to remove the instrument cluster from a Volkswagen Golf Mk5? Follow these steps to disassemble the parts: remove the plastic at the bottom of the…
Volkswagen Golf
(2003-2008 /
Golf 5, Golf V, MK 5)
Before you begin, sit in the driver's seat of your Volkswagen Golf and remove the steering wheel. Start by prising off and removing the upper cover o…
Volkswagen Golf
(1997-2003 /
MK 4, Golf 4, Golf IV)
In today's video, follow the main steps to dismantle the instrument cluster of the fourth generation Volkswagen Golf, following the instructions belo…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |