Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Window Regulator Motor on Volkswagen Golf MK3

Model: Volkswagen Golf Golf III, MK 3, Golf 3 - Years 1991-1997
Part: Power window motor

This video shows the main steps to remove and replace the window regulator motor on a Volkswagen Golf Mk3. First, open the front door and remove the door panel by unscrewing all the fixing screws present; then disconnect the electrical connector of the window buttons and the opening handle cable. At this point, remove the mechanism and window regulator motor; disconnect the electrical connector and remove the glass bracket screw, as shown in the video. Finally, remove and replace it!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Window Switches on a Volkswagen Golf
Replacing the Window Switches on a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In today's video tutorial, you will see the guide that will allow you to dismantle and replace the window switches on a Volkswagen Golf, as well as t…
Replacing the Window Regulator Motor and Mechanism on a Volkswagen Golf MK5
Replacing the Window Regulator Motor and Mechanism on a Volkswagen Golf MK5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video, see how to disassemble and replace the window regulator mechanism and motor on a fifth-generation Volkswagen Golf, as well as on other…
Replacing the Window Regulator Mechanism on the Volkswagen Golf MK4
Replacing the Window Regulator Mechanism on the Volkswagen Golf MK4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In today's video tutorial, learn how to remove and replace the electric window regulator mechanism on the fourth-generation Volkswagen Golf, followin…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos