Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : Removing the rear door panel on Volkswagen Polo 9N

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Door panel
Operation: Removing the rear door panel on Volkswagen Polo 9N

Today we will see the steps to disassemble the rear door panel on a Volkswagen Polo 9N, following the instructions below. First we go to open the rear door and start by removing the window handle, levering the sides with something thin; then unscrew the fixing screw that we find inside the hole, as shown in the video. At this point we remove the plastic cover of the grip handle and unscrew the additional screws that we find below; we just have to remove the door panel, levering the sides!


Posted on 30 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 1994-2003 - How do you remove the Volkswagen Polo door panel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos