Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the mechanism and the window lifter motor on Volkswagen Polo 6N2?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Window motor
Operation: How to remove the mechanism and the window lifter motor on Volkswagen Polo 6N2?

Let's see in this video how to remove the window motor on a Volkswagen Polo 6N1 and 6N2, following these simple steps. First we open the front door and remove the door panel, unscrewing all the fixing screws; then pry the sides and remove the handle cable. At this point we are going to unscrew the screws of our window and remove the internal rubber gasket; now we remove the glass and unscrew the fixing screws of our mechanism, together with the motor. We just have to replace it and reassemble everything, applying the reverse procedure!


Posted on 30 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - How much does the Volkswagen Polo 9n electric window motor cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos