Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wiper Blade on a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Windshield wipers

See other generations:
Video tutorial

Before you can start, exit the cabin of your Volkswagen Polo and head towards the rear wiper blade. Begin by lifting the support arm of the rear wiper.

Next, press and hold the release clip of the rear wiper blade. Once you have released the clip, you will free the wiper blade.

At this point, slide the wiper blade off its support. Once you have completed this step, you will have successfully removed the wiper blade.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to replace the windscreen wiper blades on a VW Polo 5
How to replace the windscreen wiper blades on a VW Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Using the following video tutorial, you will learn the steps to replace the windscreen wiper blades on a Volkswagen Polo 5. This operation should be …
How to Remove the Front Wiper Blade on a Volkswagen Polo
How to Remove the Front Wiper Blade on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before starting, exit the cabin of your Volkswagen Polo and head to the front wiper blade. Begin by lifting the support arm of the front wiper. Next,…
Wiper Blade Replacement on Volkswagen Polo
Wiper Blade Replacement on Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Gently lift the wiper arm, press the release button, and pull out the blade. To fit the new blade, simply slide it into the designated slot until you…

    Frequently Asked Questions

    • Polo 2009-2017 - Why won't the Volkswagen Polo wipers turn off? Read answer
    • Polo 2017-2025 - What is the fuse that regulates the wiper water on the Volkswagen Polo 2018? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos