Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Rear Parking Sensor from a Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Parking sensors

See other generations:
Video tutorial

Before starting, get out of the cabin of your Volkswagen Golf and head to the rear bumper. Under the rear bumper, there is an opening through which you can reach the inner side of the parking sensor.

Start by disconnecting the electrical connector. Next, unclip the internal clips that secure the sensor to the bumper.

At this point, unclip and extract the sensor from its housing. Once you have completed this last step, you will have finished the removal.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Removing the Air Vents from a Volkswagen Golf
Removing the Air Vents from a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, we will see how to remove the air vents from a Volkswagen Golf 4, without needing special tools. First, enter the cabin and obtain a v…
How to Replace the Rear Air Vents on the Volkswagen Golf 7
How to Replace the Rear Air Vents on the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In today's video tutorial, you will learn how to remove and replace the rear air vents on the seventh generation Volkswagen Golf, as well as on the T…
Removal and Replacement of the Rear Lock Actuator on the Volkswagen Golf
Removal and Replacement of the Rear Lock Actuator on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this brief guide, follow the main instructions to remove and replace the rear lock actuator on the Volkswagen Golf. First, open the boot and start…

    Frequently Asked Questions

    • Golf 2008-2012 - Where is the parking sensor control unit of the Golf 6 located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos