Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Rear Lock Actuator on the Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Door lock

In this brief guide, follow the main instructions to remove and replace the rear lock actuator on the Volkswagen Golf. First, open the boot and start by removing the door panel, unscrewing all the securing screws. Next, unscrew the screws securing the actuator, disconnect the electrical connector to detach it and remove it, as shown in the video. Now install the new lock module and adjust it, following the video tutorial to the end!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the trunk lock actuator of the Volkswagen Golf
How to replace the trunk lock actuator of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's steps will show us how to disassemble and replace the trunk lock actuator of the Volkswagen Golf. First, we open the rear hatch of the trunk …
Removing Fuel Flap Lock Actuator on Volkswagen Golf Mk5
Removing Fuel Flap Lock Actuator on Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, you will learn how to remove and replace the locking actuator for the fuel flap on a Volkswagen Golf Mk5. First, open the fuel flap and unscre…
How to Remove the Boot Lock on a Volkswagen Golf
How to Remove the Boot Lock on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Before starting, open the tailgate of your Volkswagen Golf. Begin by removing the tailgate panel by unscrewing the fixing screws and releasing the in…

    Frequently Asked Questions

    • Golf 2003-2008 - What to do if the door on Golf 5 does not open? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos