Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Single Seats on Volkswagen Transporter 5

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

Using the lever underneath the seat, pull the seat forward as far as possible until it reaches the end of its travel. Rotate the backrest forward using the knob, then remove the headrest by simply pulling it out by hand.

Pull the external lever, as shown in the video, to release the seat from its mount, then also pull the lever at the rear of the seat to detach it from the rear attachments. Now, climb into the van and grasp the seat from behind, pulling it out from the front attachments as well.

Job done! The procedure is the same for both single seats. Reverse the steps for reinstallation.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Seats on Volkswagen Transporter T6
Removing the Rear Seats on Volkswagen Transporter T6
Volkswagen Transporter (2014-2025 / T6, MK 6) To remove the rear seats, access them from the rear side doors and remove the black plastic clips at the front of the rails using a plastic trim tool…
How to Remove the Rear Seat of a Volkswagen Transporter T5
How to Remove the Rear Seat of a Volkswagen Transporter T5
Volkswagen Transporter (2003-2014 / T5, MK 5) To remove the rear seats in this vehicle, follow the instructions provided here and refer to the video tutorial. The two rows of seats are secured to…
Guide to removing the front seats of the Volkswagen T5
Guide to removing the front seats of the Volkswagen T5
Volkswagen Transporter (2003-2014 / T5, MK 5) Today we will see the main instructions on how to remove and replace the front seats of the Volkswagen Transporter. First, open the front doors of th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos