Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Filter Replacement

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Diesel fuel filter

See other generations:
Video tutorial

The diesel filter is located underneath the vehicle near the rear right wheel: it is a metal canister to which the inlet, outlet, and return pipes are connected; it is absolutely important to respect the direction of fuel flow, indicated on the filter with arrows.

Position a container under the filter and disconnect the pipes (push-fit); also disconnect the earth wire (this is to discharge any stray currents and avoid dangerous sparks) and loosen the retaining clip to remove the old filter and fit the new one. Secure the filter with the arrow pointing forward and reconnect the pipes and earth wire.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Removing the Diesel Filter from a VW Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Replace the fuel filter from the Volkswagen Jetta vehicle. Here’s how to remove it. Lift the car using a column lift; locate the fuel filter as shown…
How to Replace the Diesel Filter on a Volkswagen Jetta TDI
How to Replace the Diesel Filter on a Volkswagen Jetta TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) Today, we will see in this brief and simple guide the instructions to remove and replace the diesel filter on a Volkswagen Jetta TDI. First, open the…
Replacing the Diesel Filter Cartridge
Replacing the Diesel Filter Cartridge
Volkswagen Jetta (2005-2010 / MK 5, A5) To replace this filter, you will need: a T30 Torx spanner, a 10mm ratchet spanner, and the replacement cartridge with the corresponding seals. Replac…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos