Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Diesel Filter from a VW Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Diesel fuel filter

See other generations:
This video is currently unavailable

Replace the fuel filter from the Volkswagen Jetta vehicle. Here’s how to remove it. Lift the car using a column lift; locate the fuel filter as shown in the video.

Using a socket wrench, unscrew the tightening screws of the filter housing (if present). Disconnect all hoses and remove the fuel filter from the vehicle.

Replace the old filter with a new one. Fit the fuel filter under the car floor (connect hoses and cables) and tighten the protection screws. Reconnect the feed clamp to the filter pump.

Lower the car and start the Jetta.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Volkswagen Jetta TDI
How to Replace the Diesel Filter on a Volkswagen Jetta TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) Today, we will see in this brief and simple guide the instructions to remove and replace the diesel filter on a Volkswagen Jetta TDI. First, open the…
Instructions for Replacing the Diesel Filter
Instructions for Replacing the Diesel Filter
Volkswagen Jetta (1998-2005 / A4, MK 4) The diesel filter is located behind the right front headlamp (passenger side), near the windscreen washer reservoir: it is a submerged type filter. T…
How to Bleed the Fuel Supply System of the Volkswagen Jetta 1.9 TDI
How to Bleed the Fuel Supply System of the Volkswagen Jetta 1.9 TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) In this guide, we will discover the instructions that will allow you to bleed and drain the fuel from the supply system of the Volkswagen Jetta 1.9 T…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos