Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel and Window Switches on Volkswagen Passat

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Door trim panel

See other generations:
Video tutorial

Using a plastic wedge, remove the long central trim on the door panel. With the same method, lever in the gap to remove the cover of the central handle and unscrew the underlying T30 Torx screw.

Also, unscrew the bolts securing the panel from underneath, then remove the window switches by prying from below and disconnecting their connectors. At this point, simply pull the panel away from the door (work carefully), or use a trim tool if necessary.

Disconnect the cables, and you're done.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replacing the Window Switches on a Volkswagen Passat
Replacing the Window Switches on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Next, let’s go through the steps to dismantle and replace the window switches or buttons on a Volkswagen Passat. First, open the front door and start…
Replacement of the Window Switches on the Volkswagen Passat
Replacement of the Window Switches on the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Today, discover the instructions to remove and replace the driver’s side window switches on the Volkswagen Passat. First, open the front door and sta…
How to Remove the Door Panel from a Volkswagen Passat
How to Remove the Door Panel from a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you can start, open the door of your Volkswagen Passat. Begin by unclipping and removing the insert of the door handle panel, using a thin but…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos