Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : How to remove the door panel of a Volkswagen Passat

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3C, B6 - Years 2005-2010
Part: Door panel
Operation: How to remove the door panel of a Volkswagen Passat

Before we can begin, we will have to open the door of our Volkswagen Passat. So let's start by disengaging and removing the door panel pull handle insert, using a thin but strong tool to pry. After that, we will have to unscrew and remove the fixing screws of the door panel. At this point, we will need to disengage and remove the door panel. When we have removed the panel from the door, we will have to unhook the electric plug of the window lift buttons and the cable of the handle, and we will have completed the disassembly.


Posted on 19 February 2024 by ScegliAuto



How to disassemble the door panel of a Volkswagen Passat?
Volkswagen Passat (2005-2010 / 3C, B6) Good morning, today's goal is to remove the front door panel of our Volkswagen Passat. Let's start by opening the front door of the car. Then, we wil
How to remove the Volkswagen Passat front door panel
Volkswagen Passat (2014-2023 / 3G, MK 8, B8) Today we see the guide on how to disassemble and replace the front door panel of the Volkswagen Passat. First we open the front door of our car and s
How to remove the front door panel in the Volkswagen Passat?
Volkswagen Passat (2005-2010 / 3C, B6) In this tutorial, we can see how to remove the front door panel in the Volkswagen Passat, an extremely simple and fast operation. First of all, we op

Other guides that may interest you

    Frequently Asked Questions

    • Passat 2010-2014 - How to unlock rear doors on Volkswagen Passat? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos