Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Shock Absorbers on a Volkswagen New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shocks

See other generations:
This video is currently unavailable

In this tutorial, you will learn how to replace the rear shock absorbers on a New Beetle. Lift the rear of the vehicle and remove the rear wheel you intend to start with by simply unscrewing the bolts and taking it out. Using a 16 mm socket, unscrew the upper bolts of the shock absorber (they are quite tight).

Apply some penetrating spray to the lower bolts, also 16 mm, and unscrew these as well. Continue following the procedure shown in the video to remove the rear shock absorbers.

Be aware that while it may seem simple when watching the video, this procedure is suitable only for more experienced mechanics. Cheers!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to replace the rear shock absorbers on a Volkswagen New Beetle?
How to replace the rear shock absorbers on a Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this tutorial, learn how to replace the rear shock absorbers on a Volkswagen New Beetle. This operation is simple but requires good manual skills.…
How to Remove the Rear Seats from the Volkswagen New Beetle
How to Remove the Rear Seats from the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Briefly, here are the instructions to remove the rear seats from the Volkswagen New Beetle. First, open the boot lid and start unscrewing the fasteni…
How to Remove the Front Suspension on VW New Beetle
How to Remove the Front Suspension on VW New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Are the shock absorbers on your New Beetle worn or damaged? Here’s how to remove them. Unscrew the shock absorber mounting bolts with a socket wrench…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos