Do it yourself
Frequently asked questions about cars and motorcycles

Volkswagen New Beetle - Shocks

Shocks Volkswagen New Beetle (1999-2012 / mk 2, 9 c)

Volkswagen New Beetle (1999-2012 / MK 2, 9C)
How to replace the rear shock absorbers on a Volkswagen New Beetle?

In this tutorial, learn how to replace the rear shock absorbers on a Volkswagen New Beetle. This operation is simple but requires good manual skills. First, …Read all…
Posted on 16 September 2026 by ScegliAuto
Volkswagen New Beetle (1999-2012 / MK 2, 9C)
Replacing the Rear Shock Absorbers on a Volkswagen New Beetle

In this tutorial, you will learn how to replace the rear shock absorbers on a New Beetle. Lift the rear of the vehicle and remove the rear wheel you intend to …Read all…
Posted on 28 May 2026 by ScegliAuto
Volkswagen New Beetle (1999-2012 / MK 2, 9C)
How to Remove the Front Suspension on VW New Beetle

Are the shock absorbers on your New Beetle worn or damaged? Here’s how to remove them. Unscrew the shock absorber mounting bolts with a socket wrench, lift …Read all…
Posted on 8 April 2026 by ScegliAuto
Volkswagen New Beetle (1999-2012 / MK 2, 9C)
Front Shock Absorber Replacement

Lift the vehicle on a hydraulic ramp (or on suitable axle stands) and remove the wheel. To access the upper mounts of the shock absorbers, remove the plastic …Read all…
Posted on 10 February 2026 by ScegliAuto

Airbag (1) Alternator (6) Speaker (1) Shocks (4) Antenna (1) Air conditioning (3) Car stereo (10) Battery (11) Air vents (1) Bushings (1) Convertible top (7) Body (4) Glove compartment (1) Control unit (1) Key (9) Trunk lock (3) Timing belt (3) V-belt (1) Air conditioner (1) Onboard computer (1) Checks and maintenance (19) Oil pan (1) Dashboard (4) Shifter boot (2) MAF sensor (1) Brake rotors (3) Rear bench seat (1) Side marker light (2) Headlight (11) Tail light (4) Fog lights (3) Air filter (2) Cabin air filter (10) Fuel filter (2) Diesel fuel filter (2) Oil filter (2) Parking brake (1) Window switch (1) Light bulb (1) Headlight bulb (11) Tail light bulb (2) Interior dome light bulb (1) (1) Rear window (1) Handle (3) Exhaust muffler (1) Engine (2) Power window motor (9) Starter motor (2) Engine oil (3) Clock (8) Door trim panel (16) Windshield (1) Front bumper (3) Rear bumper (3) Brake pads (3) Tires (2) Shift knob (1) Pump (4) Fuel pump (2) Instrument cluster (1) Heater core (1) Fuse box (37) Seat (6) Axle shaft (1) Crankshaft position sensor (1) Door lock (4) Side mirror (4) Rearview mirror (1) Warning light – error code (6) (11) Tire pressure warning light (3) Service warning light (39) Manufacturer emblem (1) Fuel cap (1) Thermostat (2) Valve (1) Blower motor (2) Side window (3) Steering wheel (5)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos