Do it yourself
Frequently asked questions about cars and motorcycles

Volkswagen New Beetle - Air vents

Air Vents Volkswagen New Beetle (1999-2012 / mk 2, 9 c)

Volkswagen New Beetle (1999-2012 / MK 2, 9C)
How to Replace the Air Vent on a New Beetle

How to remove the air vents on a New Beetle? Follow these steps carefully for disassembly. Using a plastic or metal lever, remove the right air vent and then …Read all…
Posted on 28 March 2026 by ScegliAuto

Airbag (1) Alternator (6) Speaker (1) Shocks (4) Antenna (1) Air conditioning (3) Car stereo (10) Battery (11) Air vents (1) Bushings (1) Convertible top (7) Body (4) Glove compartment (1) Control unit (1) Key (9) Trunk lock (3) Timing belt (3) V-belt (1) Air conditioner (1) Onboard computer (1) Checks and maintenance (19) Oil pan (1) Dashboard (4) Shifter boot (2) MAF sensor (1) Brake rotors (3) Rear bench seat (1) Side marker light (2) Headlight (11) Tail light (4) Fog lights (3) Air filter (2) Cabin air filter (10) Fuel filter (2) Diesel fuel filter (2) Oil filter (2) Parking brake (1) Window switch (1) Light bulb (1) Headlight bulb (11) Tail light bulb (2) Interior dome light bulb (1) (1) Rear window (1) Handle (3) Exhaust muffler (1) Engine (2) Power window motor (9) Starter motor (2) Engine oil (3) Clock (8) Door trim panel (17) Windshield (1) Front bumper (3) Rear bumper (3) Brake pads (3) Tires (2) Shift knob (1) Pump (5) Fuel pump (2) Instrument cluster (1) Heater core (1) Fuse box (37) Seat (6) Axle shaft (1) Crankshaft position sensor (1) Door lock (4) Side mirror (4) Rearview mirror (1) Warning light – error code (6) Tire pressure warning light (15) Service warning light (40) Manufacturer emblem (1) Fuel cap (1) Thermostat (2) Valve (1) Blower motor (2) Side window (3) Steering wheel (5)

Adjusting the Handbrake on a Kia Sportage

Today, learn how to adjust the handbrake on a Kia Sportage (2016-2022). Start by opening the armrest and removing the bottom with a small flat screwdriver as shown in the video. Next, remove the inner panel on the handbrake side to access its adjustment nut. Once done, use a spanner to turn the nut clockwise to increase the handbrake tension, or alternatively, loosen the tension by turning the nut anti-clockwise. After adjusting the cable tension, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos