Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. New Beetle
  6. : Starter motor

Volkswagen New Beetle - Starter motor

Starter Motor Volkswagen New Beetle (1999-2012 / mk 2, 9 c)

Volkswagen New Beetle (1999-2012 / MK 2, 9C)
Replacing the Starter Motor on a VW New Beetle

Let's see how to remove the starter motor on a Volkswagen New Beetle. Lift the bonnet, and remove the panel covering the engine. Disconnect the power terminals …Read all…
Posted on 6 April 2026 by ScegliAuto
Volkswagen New Beetle (1999-2012 / MK 2, 9C)
Dismantling the starter motor

Before proceeding with the dismantling of the starter motor, disconnect the battery terminals. To dismantle the starter motor, it is advisable to lift the …Read all…
Posted on 23 February 2026 by ScegliAuto

Airbag (1) Alternator (6) Speaker (1) Shocks (4) Antenna (1) Air conditioning (3) Car stereo (10) Battery (11) Air vents (1) Bushings (1) Convertible top (7) Body (4) Glove compartment (1) Control unit (1) Key (9) Trunk lock (3) Timing belt (3) V-belt (1) Air conditioner (1) Onboard computer (1) Checks and maintenance (19) Oil pan (1) Dashboard (4) Shifter boot (2) MAF sensor (1) Brake rotors (3) Rear bench seat (1) Side marker light (2) Headlight (11) Tail light (4) Fog lights (3) Air filter (2) Cabin air filter (10) Fuel filter (2) Diesel fuel filter (2) Oil filter (2) Parking brake (1) Window switch (1) Light bulb (1) Headlight bulb (11) Tail light bulb (2) Interior dome light bulb (1) (1) Rear window (1) Handle (3) Exhaust muffler (1) Engine (2) Power window motor (9) Starter motor (2) Engine oil (3) Clock (8) Door trim panel (17) Windshield (1) Front bumper (3) Rear bumper (3) Brake pads (3) Tires (2) Shift knob (1) Pump (5) Fuel pump (2) Instrument cluster (1) Heater core (1) Fuse box (37) Seat (6) Axle shaft (1) Crankshaft position sensor (1) Door lock (4) Side mirror (4) Rearview mirror (1) Warning light – error code (6) (11) Tire pressure warning light (3) Service warning light (39) Manufacturer emblem (1) Fuel cap (1) Thermostat (2) Valve (1) Blower motor (2) Side window (3) Steering wheel (5)

Guide to Replacing the Seat Handle Cable on the Fiat 500

Here are the main steps to dismantle and replace the front seat handle cable on the Fiat 500. First, open the front door and start to pry on the side of the front seat folding handle; then disconnect the metal cable from the handle and remove it from under the front seat. At this point, replace and install the new front seat folding handle cable, then secure the handle to the seat; finally, check its operation!

Watch the video!


by ScegliAuto

More videos