Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen New Beetle - Door lock

Door Lock Volkswagen New Beetle (1999-2012 / mk 2, 9 c)

Volkswagen New Beetle (1999-2012 / MK 2, 9C)
How to Replace the Door Lock on a Volkswagen New Beetle
To remove the door lock on a Volkswagen New Beetle, loosen the screws securing the inner door panel and completely detach it from its position. The screws are …Read all…
Posted on 22 September 2026 by ScegliAuto
Volkswagen New Beetle (1999-2012 / MK 2, 9C)
How to Replace the Ignition Switch on the Volkswagen New Beetle?
To replace the ignition switch on the Volkswagen New Beetle, loosen the screws securing the cover of the lower part of the steering column. Once this cover is …Read all…
Posted on 18 July 2026 by ScegliAuto
Volkswagen New Beetle (1999-2012 / MK 2, 9C)
Front Door Lock Disassembly and Repair
Remove the three fixing screws located along the bottom edge of the panel; unclip the cover of the internal handle and unscrew the underlying screws; then …Read all…
Posted on 10 February 2026 by ScegliAuto
Volkswagen New Beetle (1999-2012 / MK 2, 9C)
Repairing Front Door Lock
Before proceeding with the repair, obtain the new lock cylinder. Using a Torx key, remove the retaining screws located at the bottom of the door panel. Remove …Read all…
Posted on 3 February 2026 by ScegliAuto
Airbag (1) Alternator (6) Speaker (1) Shocks (4) Antenna (1) Air conditioning (3) Car stereo (10) Battery (11) Air vents (1) Bushings (1) Convertible top (7) Body (4) Glove compartment (1) Control unit (1) Key (9) Trunk lock (3) Timing belt (3) V-belt (1) Air conditioner (1) Onboard computer (1) Checks and maintenance (19) Oil pan (1) Dashboard (4) Shifter boot (2) MAF sensor (1) Brake rotors (3) Rear bench seat (1) Side marker light (2) Headlight (11) Tail light (4) Fog lights (3) Air filter (2) Cabin air filter (10) Fuel filter (2) Diesel fuel filter (2) Oil filter (2) Parking brake (1) Window switch (1) Light bulb (1) Headlight bulb (11) Tail light bulb (2) Interior dome light bulb (1) (1) Rear window (1) Handle (3) Exhaust muffler (1) Engine (2) Power window motor (9) Starter motor (2) Engine oil (3) Clock (8) Door trim panel (16) Windshield (1) Front bumper (3) Rear bumper (3) Brake pads (3) Tires (2) Shift knob (1) Pump (4) Fuel pump (2) Instrument cluster (1) Heater core (1) Fuse box (37) Seat (6) Axle shaft (1) Crankshaft position sensor (1) Door lock (4) Side mirror (4) Rearview mirror (1) Warning light – error code (6) (11) Tire pressure warning light (3) Service warning light (39) Manufacturer emblem (1) Fuel cap (1) Thermostat (2) Valve (1) Blower motor (2) Side window (3) Steering wheel (5)

How to Remove the Headrests from the Fiat Panda

In this guide, discover the main steps to disassemble and remove the headrests, both front and rear, from the Fiat Panda, as well as other models from the manufacturer. First, get in the vehicle and press the buttons located at the base of the headrest posts; while holding them down, pull the headrests upwards to remove them, as shown in the video. At this point, reinstall the headrest by lowering it until it clicks and adjust it to the desired height!

Watch the video!


by ScegliAuto

More videos