Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen New Beetle - Handle

Handle Volkswagen New Beetle (1999-2012 / 9 c, mk 2)

Volkswagen New Beetle (1999-2012 / 9C, MK 2)
How to remove the interior door handle of the Volkswagen New Beetle
The following steps outlined in this guide will show us how to disassemble and repair the internal handle of the front door of the Volkswagen New Beetle. …Read all…
Posted on 22 January 2025 by ScegliAuto
Volkswagen New Beetle (1999-2012 / 9C, MK 2)
How to Replace the Interior Handle on a Volkswagen Beetle?
To replace the interior handle on a Volkswagen Beetle, unscrew the fixing screws that secure the door panel to its housing: these screws are located at the …Read all…
Posted on 14 August 2026 by ScegliAuto
Volkswagen New Beetle (1999-2012 / 9C, MK 2)
How to Replace the Handle on the New Beetle
Is the handle on your car broken? Let's briefly see how to remove the handle from the door housing on the New Beetle. Remove the cover caps from the holes on …Read all…
Posted on 12 May 2026 by ScegliAuto
Airbag (1) Alternator (6) Speaker (1) Shocks (4) Antenna (1) Air conditioning (3) Car stereo (10) Battery (11) Air vents (1) Bushings (1) Convertible top (7) Body (4) Glove compartment (1) Control unit (1) Key (9) Trunk lock (3) Timing belt (3) V-belt (1) Air conditioner (1) Onboard computer (1) Checks and maintenance (19) Oil pan (1) Dashboard (4) Shifter boot (2) MAF sensor (1) Brake rotors (3) Rear bench seat (1) Side marker light (2) Headlight (11) Tail light (4) Fog lights (3) Air filter (2) Cabin air filter (10) Fuel filter (2) Diesel fuel filter (2) Oil filter (2) Parking brake (1) Window switch (1) Light bulb (1) Headlight bulb (11) Tail light bulb (2) Interior dome light bulb (1) (1) Rear window (1) Handle (3) Exhaust muffler (1) Engine (2) Power window motor (9) Starter motor (2) Engine oil (3) Clock (8) Door trim panel (17) Windshield (1) Front bumper (3) Rear bumper (3) Brake pads (3) Tires (2) Shift knob (1) Pump (5) Fuel pump (2) Instrument cluster (1) Heater core (1) Fuse box (37) Seat (6) Axle shaft (1) Crankshaft position sensor (1) Door lock (4) Side mirror (4) Rearview mirror (1) Warning light – error code (6) Tire pressure warning light (15) Service warning light (40) Manufacturer emblem (1) Fuel cap (1) Thermostat (2) Valve (1) Blower motor (2) Side window (3) Steering wheel (5)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos