Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handle on the New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Handle

See other generations:
Video tutorial

Is the handle on your car broken? Let's briefly see how to remove the handle from the door housing on the New Beetle. Remove the cover caps from the holes on the door side, unscrew the screw located on the side of the door using a screwdriver as shown in the video, remove the cover or the cylinder from the handle side, then slide the handle to detach it from the door.

After removing the door opening handle, insert the new part into the door. Fit the key cylinder or lock, then screw in the securing screws on the side of the door.

Test the operation of the handle.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to remove the interior door handle of the Volkswagen New Beetle
How to remove the interior door handle of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) The following steps outlined in this guide will show us how to disassemble and repair the internal handle of the front door of the Volkswagen New Bee…
Disassembly of the front door panel of the Volkswagen New Beetle.
Disassembly of the front door panel of the Volkswagen New Beetle.
Volkswagen New Beetle (2011-2018 / MK 3) Today's instructions will allow us to disassemble and remove the front door panel of the Volkswagen New Beetle. First, let's open the front door of t…
How to Remove the Door Panel on New Beetle
How to Remove the Door Panel on New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) Let's carry out the removal of the door panel on a Volkswagen New Beetle (passenger side). First, disconnect the battery terminals located in the eng…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos