Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Volkswagen New Beetle.

Model: Volkswagen New Beetle MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Today's instructions will allow us to disassemble and remove the front door panel of the Volkswagen New Beetle. First, let's open the front door of the car and start by removing the plastic cover of the grab handle by unscrewing the screws underneath; then, we rotate the lower screw of the panel, prying at the sides to detach and remove it, as shown in the video.

Finally, let's disconnect the handle cable and the electrical connector for the window lift switch; we will then reattach and connect the door trim!


Posted on 26 December 2025 by ScegliAuto


Related tutorials

How to replace the door speakers of the Volkswagen New Beetle
How to replace the door speakers of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) These short and simple instructions will show us how to disassemble and replace the front door speakers of the Volkswagen New Beetle. First, we open …
How to Remove the Door Panel on New Beetle
How to Remove the Door Panel on New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) Let's carry out the removal of the door panel on a Volkswagen New Beetle (passenger side). First, disconnect the battery terminals located in the eng…
How to remove the interior door handle of the Volkswagen New Beetle
How to remove the interior door handle of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) The following steps outlined in this guide will show us how to disassemble and repair the internal handle of the front door of the Volkswagen New Bee…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos