Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Air Vents on Golf 7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air vents

See other generations:
Video tutorial

As shown in the video, to remove the side air vents, simply lever underneath the frame and detach them gradually from the housing. I strongly recommend performing this operation very gently, lifting a small part of the frame at a time until it is completely extracted from the housing.

To do this task better, it would be appropriate to use a plastic lever to avoid scratching the plastics; otherwise, use a small flat screwdriver but be careful not to damage the vents. Repeat the operation on both vents and fit the new ones.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Vents on the Volkswagen Golf
How to Replace the Air Vents on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide provides instructions on how to remove and replace the air vents on the Volkswagen Golf, following the steps outlined below. First, get in…
How to Remove the Air Vents on a Volkswagen Golf 4
How to Remove the Air Vents on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the air vents (side) on a Volkswagen Golf. Use multiple levers to remove the vents. Pry at the top and bottom with the levers (as…
How to Replace the Rear Air Vents on a Volkswagen Golf
How to Replace the Rear Air Vents on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) These simple steps will show you how to remove and replace the rear air vents on a Volkswagen Golf. First, climb into the back of the vehicle and beg…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos