Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Fuel injector replacement

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Injectors
Operation: Fuel injector replacement

Keeping the injectors in good condition improves the pulverization of the fuel and therefore obtains many advantages: better performance, reduced consumption and pollutants. Periodic replacement of the injectors provides these benefits. To replace it, it is necessary to disconnect the electric cables connected to the various coils and then unscrew the screws of the support bar that conducts the fuel. It is not necessary to remove the inlet tube. With pliers remove the seger that holds the injector still and then remove it from the support. Insert the new injector and put the catch back in place to lock it. Act in this way on all injectors. Refit the bar and restore the electrical circuits. Carry out a verification test.


Posted on 19 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What problems do the injectors of the Volkswagen Polo present? Read Answer
    • Polo 2009-2017 - Why are the injectors on a Volkswagen Polo 1.6 TDI making noise? Read Answer
    • Polo 2001-2009 - What to do if I have Volkswagen Polo injector problems? Read Answer
    • Polo 2009-2017 - What to do if I have problems with the injectors of the Volkswagen Polo 1.2 TDI? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos