Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
Polo 4, MK 4, Polo IV, 9N, MK IV
- Years 2001-2009 Today we will see, in this short and simple guide, how to disassemble and clean the fuel injectors of the Volkswagen Polo. First of all, we open the bonnet of our car and start disconnecting the fuel line from the rail; then unscrew the fixing screws to remove the injectors, disconnecting the electrical connector, as shown in the video. Now let's remove the individual injectors from the rail, cleaning them using a special injector degreaser; we replace the latter if they are too clogged.
Posted on 22 November 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |